WAVELL PRO
This is a collection of the most frequently asked questions about Wavell PRO
If, contrary to expectations, you can't find the answer you're looking for, please feel free to send us a message using the contact form below.
Specifications
SOUND
Sensitivity
96 dB ± 2 dB
Frequency
20–20,000 Hz
Formats
aptX / AAC / SBC
Impedance
32Ω
GENERAL
Bluetooth Name
Wavell PRO
Range
10 meters
Interface Headphones
Touch
Interface Case
Function button
BATTERY
Earphones:
Playback time
7+ hours
Case:
Number of PRO charges
2 times
Charger input
USB-C
TECHNOLOGY
Chipset
Qualcomm QCC 5141
Bluetooth version:
Bluetooth 5.2
Noise Reduction
Hybrid ANC (4 ANC microphones)
Transparency: Yes
Multi-connectivity: Yes
Auto detection: Yes
TrueWireless Mirroring™️: Yes
CvC 8.0 Echo Cancellation and Noise Suppression: Yes
Instructions
QUICK START
1. Put your Wavells in the case
2. Wait about 2 seconds (until the indicator lights up)
3. Take your Wavells out of the case.
4. Connect to “Wavell PRO” in your Bluetooth settings.
5. Play some music and enjoy your new Wavell PRO.
CHARGING
There are two ways to charge the Wavell PRO:
1. Using a USB-C charging cable plugged into the USB-C port on the case.
2. Via wireless charging, where the coil is located at the bottom of the case, which means it must be placed upright (with the lid on top). When the case is placed on a wireless charger, it will charge wirelessly.
One thing all charging methods have in common is that the indicator light on the front will start to glow.
RECOVERY
1 Open the Bluetooth settings on your device and “forget” the headphones
2 Unpair the devices to which the headphones are connected.
3 Press and hold the button on the case for 10 seconds
4 When the indicator light on the headphones flashes red and blue, the headphones have been restored and are ready to be reconnected.
Do you have any questions?