1. Put your Wavells in the case

2. Wait about 2 seconds (until the W indicator lights up)

3. Take your Wavells out of the case and wait for the light to start flashing.

4. Connect to “My Wavells” in your Bluetooth settings.

5. Play some music and enjoy your Wavells

There are two ways to charge the Wavell TWO:

1. Using a USB-C charging cable plugged into the USB-C port on the case.

2. Via wireless charging, where the coil is located at the bottom of the case, which means it must be placed upright (with the lid on top). When the case is placed on a wireless charger, it will charge wirelessly.

One thing all charging methods have in common is that the indicator light on the front will light up in red, orange, or green, depending on the battery level.

1. Put your Wavells in the case and open the lid

2. Hold down both buttons for about 5 seconds (until the W indicator has flashed)

3. Go to your Bluetooth settings and forget "My Wavells"

4. Take your Wavells out of the case and wait for the light to start flashing.

5. Connect to “My Wavells” in your Bluetooth settings.

6. Play some music and check to see if the problem has been resolved.

Feel free to repeat the process 2–3 times if it doesn't work the first time.